Assembly Instructions for Celebrity Rocker Theater Chairs

Installation Instructions for the Celebrity Rocker Theater Chairs

STEP 1:

1. The hardware to assemble the chairs is included.
2. The hardware to mount/attach the legs to the floor is not included. (This hardware is available in your local Home Depot/Lowes/Ace Hardware
3. If going into wood floor, we recommend a minimum ľ inch plywood base.
4. The opening in the leg is the rear of the leg.
5. Mount legs/standards 21” center to center for a 21” wide chair or 22” center to center for a 22” wide chair

STEP 2:
Installing the Backs

1. Look at the chairs back, notice on each side there is a metal plate/wing that sticks out.
2. Next notice that there is a notch cut out of the bottom of each wing.
3. Next notice on the back of the leg there is a black nut on a threaded rod. Mount the notched wing onto the threaded rod.
4. Finger-tighten the black nut.
5. Now look inside the leg from the back, towards the top there is a threaded hole.
Push the back of the chair forward so that the threaded hole on top of the wing lines up with the threaded hole inside the leg. With your fingers put the 5/16” by 1” black bolt through the threaded hole and through the threaded hole on the wing.
6. Tighten both bottom and top bolts.

STEP 3:
Installing the Seats

1. Using 2 - 5/16” bolts
2. Mount the seat to the leg/standard using the metal ear sticking out of the leg and the metal ear sticking out of the seat. Screw the 5/16” bolt through them both and tighten.

STEP 4:
Installing the Cup Holder Armrests:

Center Standards
1. The top of the leg has 2 metal nipples, lineup the holes in the poly plastic armrests with the nipples and using the 1” Phillips machine head screw, screw on the cup holder armrests.
2. Using the small round plastic dots, cover up the screw holes.

End Panels
1. The top of the leg has 2 holes that have been drilled for the cup holder armrests.
Line the holes in the poly plastic cup holder armrests with the holes in the top of the leg. Using the 1 ˝” Phillips sheet metal pan head screws, screw the cup holders to the legs.
2. Using the small round plastic dots, cover up the screw holes.

If you need assistance with assembly or installation please call our sales office. We are available Monday – Friday 9 AM to 5 PM EST.

www.SeatsandChairs.com Toll-Free: 1-800-632-7657 Office: 727-393-0400 Fax: 727-393-9600 Email: info@seatsandchairs.com